+86-0755-36923559

Categories

Home > Knowledge > Content

Knowledge

3mm 1.75mm ABS/PLA 3D Pen Filament-language

Shenzhen Language Technology Co.,Ltd | Updated: Sep 28, 2016

Basic Info

Model NO.:MT107Material:ABS
Net Weight:1kgColor:White
FOB:to Shengzhen or Guanzhou PortPack:1kg/Spool/Vacuum Pack/Box
Grows Weight:1.4kgTrademark:OEM available
Specification:ROHSOrigin:Dongguan City China
HS Code:39169090

3mm 1.75mm ABS/PLA 3D pen filament


MakingTop 3D printer filament
1. High quality & abundant storage 
2. OEM is available 
3. Nickel & lead free 
4. Factory direct sale 
5. suitable for all FDM 3D Printer
6. SGS,RoHS certificated
 
Specifications:
Material: PLA ABS HIPS WOOD NYLON FLEXIBLE PVA PC POM...
Colours: more than 28 colors
Filament diameter: 3mm or 1.75mm
Diameter variation: +/- 0.03mm
Packing: 1kg/spool/vacuum pack(with desiccant)/box
 
PLA filament characteristics:
 
(1)No block nozzle, good stick hot bed, a smooth PLA used
 
(2)can be processed at 185 degrees
 
(3)low shrinkage, thermoforming dimensional stability
 
(4)Good toughness high strength, high stiffness
 
(5)No-toxic, odor harmless, good smell
 
ABS is commonly used in 3D printing, has the following characteristics:
 
(1) high strength, good toughness;
 
(2) density is small, when printing larger volume model lighter, save money;
 
(3) cost-effective, can be processed in wide range temperature;
 
(4) softer than PLA;
 
(5) diameter of 3.0/1.75mm, variations + /-0.03mm,roundness +/-0.03mm;
 
(6) 1 kg /plastic spool packaging, can be automatic feed;
 
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..
 
Production Control:
 
1.Produce process
 
I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).
 
II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.
 
III.Adjust temperature and dragging rate , make filament diameter range at 1.72-1.76mm/2.85-2.95mm, roundness +/-0.03mm, each spool net weight 1kg+/-0.01kg
 
IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.
 
2.Productiong quality control
 
   I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
 
   II.keep each record filament samples sent to customers, build a tracking able document.
 
   III.when the filament put on shelf longer than half a year, we will dry the filament again.
 
 3.About material
 
We haven't produced with scrap outlet, rework&recycle material, or dispose, but 100% raw material imported from USA and Japan for quality assurance purpose.